Guyed tower is a special telecom lattice tower for communication and can be installed on rooftops, ground, or hills with load-bearing capabilities. It is mainly constructed using steel pipes, angle steel, cables, or by using 60-degree angled angle steel or round steel, in a triangular layout with guy wires for stability. We also supply rooftop telecom tower and camouflage antenna tower on-site measurement, program design, on-site installation guidance, rack inspection and maintenance. Inquiry now!!
| Height | As per request |
| Material | Q235B (Yeild Strength≥235MPa), 50*4-60*4 or equivalent |
| Basic Wind speed | 180km/h_3 second gust or as per design |
| Antenna Type | GSM, RRU,CDMA, MW etc. |
| Antenna load | As per request |
| Surface treatment | Hot dip galvanized/Painting/Powder coating |
| Design standard | GB / ANSI / TIA-222-G/BS 8100 |
| Welding Standard | AWS D1.1 |
| Working temperature | -35℃-45℃ |
| Vertical direction | <1/1000 |
| Galvanization standard | GB/T 13912-2002, EN ISO 1461,ASTM/A123 |
| Color | As per request |
| Anti-seismic Grade | 8 |
| Fall Arrest System | Available if need |
| Nuts and Bolts | Gr 6.8 and 8.8 |
| Standard | ISO9001:2015 |
| Service life | 30/50 years |
The guyed pole tower works with minimal wind-facing area, simple structure, and lightweight. It’s easy to process with low material costs, offering a high cost-performance ratio. And the guyed transmission tower can be designed with multiple platforms to mount several antenna devices with strong load-bearing capabilities.However, it requires significant space for guy wires to prevent slackness, resulting in higher maintenance frequency compared to other tower types.
1.Customers can choose design standards: GB/ANSI/TIA-222-G/BS 8100.
2.Our guyed communication towers are with strong structural stability, high safety and wind resistance.
2. All guyed towers are certified by ISO9001. To meet each client's request, we can do certificates like SGS/TUV/CE/SONCAP/SEC,etc.
3. Surface treatment: tot-dip galvanization standards following GB/T 13912-2002 and ASTM A123, painting or spray. Colors can be tailored.
4. Steel material available: mainly Q235B or A36/A572.
5. Our guyed towers can be prefabricated, very convenient to transport and install.
6. Long working life: each tower can be designed to function 30 or 50 years.
7. Tailored foundation design: to fit in unusual environment.
The guyed lattice tower by our guyed tower manufacturers can be in the height over 100m, which require high-level skill of erection and equipment if necessary. Guyed towers can be installed in typical ways by a crane or a gin pole. Generally, when we utilize the crane, the guyed tower sections are hoisted over another and connected by flange tight.If with gin pole which suits for guyed towers in all heights, the installation requires the structures exceed the pick heights of available cranes.After the erection is finished,it should be made sure that,the allowable range of verticality deviation of the tower body center is 1‰ of the total height of the tower guyed.
English
